Automatic Clock In: How to Track Crew Hours Without Manual Data Entry
How Automatic Clock In uses job site geofences to record crew hours with no punches, no paper, and no retyping, plus how to set it up and what still needs a person.
Updated Nov 16, 2026
The short answer
Automatic Clock In uses a geofence around each job site to clock workers in when their phone enters the site and out when they leave. It removes manual punches, paper timesheets, and retyping hours into payroll, while hours land on the right job and travel time between jobs is calculated for you. In Supercrew, it's on the Team and Pro plans.
Most contractors don't have a time tracking problem. They have a data entry problem.
A worker forgets to punch in, so someone fixes it later from memory. A foreman writes the week's hours on paper on Friday. The office retypes those hours into a spreadsheet, then again into payroll, then tries to work out which job each hour belongs to. Every one of those steps takes time, and every one is a chance for a mistake.
Automatic Clock In removes most of that work. Here's how it works, what it replaces, what still needs a person, and how to set it up so it's reliable.
What is Automatic Clock In?
Automatic Clock In uses a geofence, a virtual boundary drawn around each job site. When a worker's phone enters the geofence, they're clocked in to that job. When they leave, they're clocked out. Nobody taps a button, fills in a timesheet, or remembers anything.
It's different from the other ways time tracking apps use location:
| Method | What it does | Who still has to act |
|---|---|---|
| Automatic Clock In | Clocks workers in and out as they enter and leave the job site | Nobody, for normal days |
| Geofence reminders | Sends a reminder to clock in or out near the job site | The worker still taps clock in |
| GPS at punch | Records location when the worker clocks in or out | The worker still taps clock in |
| Manual time entry | Worker types or taps in their hours | The worker, and often the office |
Reminders and GPS punches prove where someone was, but they still depend on the worker remembering. Automatic Clock In is the only one that takes the punch out of their hands.
How Automatic Clock In works in Supercrew
Automatic Clock In works offline. If a site has no signal, the app still clocks workers in and out and syncs when the phone reconnects.
A few settings make it fit how construction crews actually work:
- Working hours: Automatic Clock In runs during scheduled working hours. You decide whether arriving early or staying late counts, company-wide or per worker.
- Your Shop: Set your office, warehouse, or yard up as a Shop. It has its own rules, so a crew that loads up at 6:15 can be clocked in when working hours start instead.
- Supplier sites: Add the lumberyard or supply house you visit regularly as a Supplier, so material runs are recorded clearly.
- Automatic site creation: If a crew spends more than 20 minutes (adjustable) at a new location during working hours, Supercrew can create the job site and start tracking, so unplanned stops aren't lost.
- Exceptions: Turn off Automatic Clock In for a specific job if workers there should clock in by hand.
The manual data entry it removes
| Manual step | With Automatic Clock In |
|---|---|
| Workers remembering to punch in and out | Clocked in and out when they arrive and leave |
| Fixing missed punches from memory | Far fewer missed punches to fix |
| Filling in paper timesheets | Timesheets build themselves during the day |
| Working out which job each hour belongs to | Hours land on the job where the work happened |
| Calculating drive time between jobs | Travel time recorded between clock-out and the next clock-in |
| Retyping hours into payroll | Approved hours export to your payroll or accounting system |
It also takes care of the small, expensive habits: a 7:10 arrival written down as 7:00, hours rounded up at the end of the week, or a friend punching in for someone running late.
What still needs a person
Automatic Clock In handles the routine. A few things should still get a human eye:
- Approving timesheets before payroll runs.
- Cost codes, if you use them. Crews can tag the type of work they're doing, like forming or framing, when they clock in or as the work changes.
- Edge cases, like a worker whose phone died, or a site where the geofence needs adjusting.
- Workers who prefer to clock in by hand. You can set a different clock-in method for any worker, including manual clock in with reminders, and owners or permitted workers can clock others in and out.
How to set up Automatic Clock In so it's reliable
- Use a geofence of at least 100 meters. Smaller fences can miss arrivals, especially where GPS is weak.
- Set location permission to Always Allow on every worker's phone. Without it, Automatic Clock In can't run.
- Keep Wi-Fi turned on, even when using mobile data. It helps the phone pinpoint location.
- Open the app about once a week so it stays up to date.
- Check your working hours. If clock-ins before or after working hours are turned off, Automatic Clock In won't run outside them.
- Pilot with one crew for a pay period, compare the hours with what you'd expect, and adjust geofence sizes before rolling it out.
You'll find the full checklist in the app under More → Time Tracking.
What about privacy?
This is usually the first question crews ask, and it deserves a straight answer. With Automatic Clock In, Supercrew captures location when a worker clocks in and out. Optional Live Location and route tracking run only during working hours. Supercrew never tracks or shows a worker's location outside their working hours, and never sells location data.
If someone doesn't want their location used at all, you can set them to Manual – Time only, which records no location. For more, see Is Supercrew tracking me after work?
Explain this to your crew before you switch it on. It's the single biggest thing you can do to avoid pushback. Our guide to rolling out Supercrew without the pushback covers the conversation.
Which apps offer Automatic Clock In?
Plenty of apps use geofences, but most only send reminders. As of our latest checks in November 2026:
- Supercrew: Automatic Clock In on the Team and Pro plans, with no base fee.
- Timeero: Automatic Clock In on its Pro plan. See Supercrew vs Timeero.
- Workyard: Automatic Clock In on its Autopilot plan, which isn't priced publicly. See Supercrew vs Workyard.
- ClockShark, busybusy, and QuickBooks Time: geofence reminders that prompt workers to clock in. See all comparisons.
- ExakTime: geofences limit where workers can clock in, but they still punch themselves. See Supercrew vs ExakTime.
Vendors change plans often, so confirm features on the plan you'd actually buy.
The bottom line
Every manual step between the job site and payroll costs time and invites mistakes. Automatic Clock In removes the biggest one, the punch itself, and the rest follows: hours on the right job, travel time calculated, and timesheets ready to approve.
Try Supercrew free for 7 days and set up your first job site in minutes. No credit card or contract required.
Frequently asked questions
What is Automatic Clock In?
Automatic Clock In clocks workers in when they enter a job site's geofence and out when they leave, using the phone in their pocket. Nobody has to tap clock in or fill in a timesheet.
How do I track crew hours without manual data entry?
Use Automatic Clock In so hours are recorded as workers arrive and leave each job, let the app calculate travel time between jobs, approve timesheets, and export approved hours straight to payroll instead of retyping them.
Does Automatic Clock In work without cell service?
Yes. Supercrew clocks workers in and out offline and syncs when the phone reconnects.
Will Automatic Clock In drain my crew's phone batteries?
Supercrew is designed to minimize battery use while still tracking time accurately.
Does Automatic Clock In track workers after hours?
No. Supercrew captures location when workers clock in and out, and optional Live Location runs only during working hours. It never tracks or shows a worker's location outside their working hours.
Why isn't Automatic Clock In working for a worker?
Check that the job has a geofence of at least 100 meters, the phone's location permission is set to Always Allow, it's within working hours, and Automatic Clock In isn't turned off for that job. Weak GPS can also delay it.
Which Supercrew plans include Automatic Clock In?
Team and Pro. The Lite plan uses manual clock in.
How long do I have to keep time records in the U.S.?
Under the federal Fair Labor Standards Act, payroll records must be kept for at least three years, and the records wages are based on, like time cards, for two. The law requires hours worked each day and each workweek, and lets you use any timekeeping method that's complete and accurate. State rules can add to this.