Best Time Tracking Apps for Concrete and Civil Contractors
Pour-day early starts, yard time, big remote sites, and operator tickets. What concrete and civil contractors need from a time clock app, and seven apps compared.
Updated Nov 15, 2026
The short answer
For most small and mid-size concrete and civil contractors, look for automatic or foreman clock-in, offline tracking, adjustable geofences, separate yard and travel time, and job budgets. Supercrew fits crews that want hands-free tracking, busybusy adds equipment, HCSS HeavyJob suits larger heavy civil firms tracking production, and Arcoro Time, Workyard, Raken, and ClockShark each fit other needs.
Most time tracking apps are built for a crew that shows up at one address, works a regular shift, and goes home. Concrete and civil work doesn't run like that.
A finishing crew might be on site at 4:30 a.m. because the trucks are booked for 5:00. An excavation crew loads up at the yard, drives an hour to a rural site with one bar of signal, and moves along a half-mile of pipe trench over the week. Operators need current tickets before they get in the seat. And when a pour goes long or a trench hits rock, you want to know what it did to the labor budget before the job is over, not after payroll.
This guide covers what to look for in a time tracking app for concrete and civil contractors, then compares seven apps built for field crews. Supercrew publishes this list and includes itself. We've tried to be clear about where other apps are the better fit.
What concrete and civil crews need from a time clock
- Early and irregular starts: Pour days start before sunrise and run until the slab is finished. The app should record the real start time, and you should control whether early clock-ins count.
- Yard, shop, and travel time: Crews often meet at the yard, load equipment, and drive to the site. You need yard time, drive time, and on-site time kept apart for payroll and job costing.
- Large and remote sites: Highway, subdivision, and utility jobs cover a lot of ground. Look for adjustable geofences and clock-ins that work offline and sync later.
- Foreman-run crews: Not every laborer wants to manage an app. A foreman should be able to clock in the whole crew.
- Labor by phase: Forming, placing, finishing, and stripping, or excavation, pipe, backfill, and grading. Cost codes show which phase is going over.
- Job budgets during the job: Concrete and civil margins depend on labor hours. You want hours against budget daily, not once the job closes.
- Operator tickets and certifications: Equipment tickets, confined-space, and flagging certifications should live on each worker's profile with expiry alerts.
- Equipment: If you run heavy iron, you may need equipment hours or location next to labor. That's a different job from a time clock, so be honest about whether you need both in one app.
- Payroll export: Approved hours should go straight into the payroll or accounting system you already use.
Bidding public work? Davis-Bacon and state prevailing wage jobs need certified payroll. Ask any vendor exactly how their hours get into your certified payroll reports before you sign up.
The apps at a glance
| App | Best for | How crews clock in |
|---|---|---|
| Supercrew | Small and mid-size concrete and civil crews that want hands-free tracking | Automatic by geofence, foreman for the crew, or manual |
| busybusy | Contractors who need equipment tracked alongside labor | Mobile app, with GPS and geofences |
| HCSS HeavyJob | Larger heavy civil contractors with production tracking | Foreman time cards |
| Arcoro Time (ExakTime) | Established contractors with back-office systems to feed | GPS-verified punches, foreman group entry |
| Workyard | Large or oddly shaped sites and detailed GPS records | Mobile app with polygon geofences |
| Raken | Contractors who live in daily reports | Mobile app with geofence rules |
| ClockShark | Simple scheduling plus crew time | Mobile app, CrewClock for foremen |
1. Supercrew: Best for hands-free crew time on concrete and civil jobs
Supercrew, formerly ConstructionClock, clocks workers in and out automatically when they enter and leave a job site's geofence. Nobody has to remember to punch at 4:30 a.m. with gloves on, and nobody rounds a 13-hour pour day down to 12 at the end of the week.
You set the geofence size for each job, so it can cover a single driveway or a large site. Clock-ins work offline and sync when the phone reconnects, which matters on rural and early-stage sites. If a crew starts before scheduled hours, your Working Hours settings decide whether those early clock-ins count, so pour-day starts can be paid correctly.
Each company can mix clock-in methods: automatic for most of the crew, a foreman clocking in laborers who'd rather not use the app, and manual clock-in with reminders for anyone who prefers it. Set your yard up as a Shop and it gets its own clock-in rules. Time between clocking out of one job and into the next is recorded as travel time.
For job costing, job budgets show labor hours and cost against the budget while the work is happening, on every plan. On Team and Pro, cost codes let crews tag time to phases like forming, placing, and finishing, and Employee Certifications keeps operator tickets and safety certifications on each worker's profile with alerts before they expire. Approved hours export to QuickBooks, Xero, Sage, and Payworks.
Best fit: Concrete, flatwork, foundation, excavation, and site-work contractors, typically 5 to 50 workers, who want accurate hours without chasing timesheets.
Consider before choosing: Supercrew doesn't track equipment. Cost codes show up in timesheet and job reports, but they aren't sent to payroll integrations yet. If you need equipment hours or certified payroll in the same system, look at the options below or pair Supercrew with your existing tools.
2. busybusy: Best for tracking crews and equipment together
busybusy combines construction time tracking with equipment tracking. Workers log time against projects and cost codes, and equipment GPS can show where machines are even when nobody is clocked in.
For excavation, utility, and heavy-civil contractors with a lot of iron, seeing labor and equipment side by side can make job costing much more complete.
Best fit: Civil and excavation contractors whose equipment costs matter as much as labor.
Consider before choosing: Decide whether you need equipment hours tied to employee time, GPS hardware on machines, or full telematics. They're different requirements with different costs.
3. HCSS HeavyJob: Best for larger heavy civil contractors
HCSS HeavyJob is built specifically for heavy civil contractors. Foremen complete daily time cards that combine crew hours, equipment hours, cost codes, and production quantities, so the office can compare actual production with the estimate.
It's a strong fit for road, bridge, and utility contractors who already estimate in detail and want field data to match that structure.
Best fit: Mid-size and large heavy civil contractors with dedicated estimating and project controls staff.
Consider before choosing: It's a bigger system to set up and run, and it relies on foremen entering time cards. A 10-person flatwork crew will likely find it more than they need.
4. Arcoro Time (formerly ExakTime): Best for established contractors
Arcoro Time is a long-running construction time and attendance platform. It offers GPS-verified punches, job site geofences, cost codes, foreman group entry, and payroll-ready timecards.
It suits contractors whose field hours need to feed construction accounting, payroll, and HR systems in a structured way.
Best fit: Growing and established concrete and civil contractors with defined back-office processes.
Consider before choosing: Map every system the data has to reach before you start. Setup takes more work than lighter apps.
5. Workyard: Best for large sites and detailed GPS
Workyard supports polygon-shaped geofences, which helps on long, narrow, or irregular sites like road and pipeline work. It also records routes, mileage, and travel time, and stores time offline until signal returns.
Best fit: Civil contractors who want detailed location, route, and mileage records.
Consider before choosing: Detailed tracking needs a clear GPS policy for your crew. Decide what managers actually need to see, and explain it.
6. Raken: Best for daily reports and production
Raken is a field reporting platform with a built-in time clock. Hours, cost codes, and breaks sit next to daily reports, production notes, safety records, and photos.
Best fit: Concrete subcontractors and GCs who already send detailed daily reports and want time in the same place.
Consider before choosing: Its location features focus on clock-in rules rather than continuous travel history.
7. ClockShark: Best for simple scheduling with crew time
ClockShark combines scheduling, job and task tracking, and GPS on clock events. CrewClock lets a foreman clock in several workers at once.
Best fit: Small concrete contractors who want scheduling and time tracking in one straightforward app.
Consider before choosing: Geofences send reminders rather than clocking crews in automatically, so someone still has to tap.
Which app fits your company?
Residential concrete and flatwork
Several small jobs a day, early starts, and crews that don't want another app. Prioritize Automatic Clock In, travel time between jobs, and job budgets. Supercrew or ClockShark are good starting points.
Commercial concrete
Bigger pours, more phases, and GCs asking for documentation. Add cost codes by phase and daily reporting. Supercrew with cost codes, Raken, or Arcoro Time are worth comparing.
Excavation, utilities, and site work
Remote sites, operator tickets, and equipment. Look for offline tracking, large or custom geofences, and certifications. Add equipment tracking with busybusy if machines drive your costs.
Heavy civil
Road, bridge, and large utility contractors with estimators and project controls usually need production quantities tied to cost codes. HCSS HeavyJob is built for this.
Setting up time tracking for a concrete or civil crew
Tell your crew what the app records and when. With Supercrew, location is used at job sites and during working hours, not on personal time. Covering that up front saves a lot of pushback.
If you're estimating materials too, our free concrete calculator works out yards for slabs, footings, and columns.
See how Supercrew works for concrete contractors, or try it free and set up your first job site in minutes.
Frequently asked questions
What is the best time clock app for concrete contractors?
It depends on how you work. Supercrew clocks crews in automatically when they reach the site, which helps with early pour-day starts. ClockShark suits small crews that want scheduling built in, and Raken suits contractors who rely on daily reports. Supercrew publishes this list, so compare each app's current plans yourself.
What is the best time tracking app for civil contractors?
Small and mid-size civil and excavation crews usually need offline tracking, large geofences, travel time, and operator certifications, which Supercrew covers. If equipment costs matter, busybusy tracks machines alongside labor. Larger heavy civil contractors tracking production quantities often use HCSS HeavyJob.
Does time tracking work on remote sites with no cell service?
Many construction apps store clock-ins on the phone and sync when signal returns. Supercrew clocks workers in and out offline. Test any app at your worst-signal site during a pilot.
Can a foreman clock in the whole crew?
Yes, in most construction apps. Supercrew lets a foreman manage time for the crew, ClockShark has CrewClock, and Arcoro Time and HCSS HeavyJob support foreman entry.
How should concrete contractors handle early starts on pour days?
Use an app that records the real arrival time and lets you control whether early clock-ins count. In Supercrew, Working Hours settings decide whether clock-ins before scheduled hours are paid.
Do these apps handle certified payroll for prevailing wage jobs?
It varies, and many time tracking apps only export hours to a payroll system that produces the report. Ask each vendor exactly how hours reach your certified payroll before you commit.
How long do I have to keep time records in the U.S.?
Under the federal Fair Labor Standards Act, payroll records must be kept for at least three years, and the records wages are based on, like time cards, for two. The law requires hours worked each day and each workweek, and lets you use any timekeeping method that's complete and accurate. State rules can add to this.